📞 Call — 404-698-0404
📞 404-698-0404 ✉ Contact Us Serving Georgia, Alabama, North Carolina & Tennessee
Southeast Building Consultants, LLC — Commercial Property Inspections, Property Condition Assessments, Thermal Imaging & Consulting Services

Commercial Radon Testing • Occupied Buildings & Transactions • GA, AL, NC & TN

Indoor Air • Occupied Buildings • Transactions

Commercial Radon Testing

Know your building’s radon levels — commercial radon testing for offices, multifamily, schools and other occupied properties across Georgia, Alabama, North Carolina & Tennessee.

Radon can’t be seen or smelled — testing is the only way to know.

Radon is a naturally occurring radioactive gas that forms as uranium in soil and rock breaks down. It can enter commercial buildings through foundation cracks, slab joints, utility penetrations and other openings, and it can accumulate in occupied spaces.

Southeast Building Consultants, LLC provides commercial radon testing for property buyers, owners, lenders and facility managers who want to understand indoor radon levels in their buildings.

Occupied commercial office space where radon testing may be performed

Why Commercial Radon Testing Matters

According to the U.S. Environmental Protection Agency (EPA), radon is a leading cause of lung cancer among non-smokers. Because radon levels can vary widely from building to building — even on the same street — testing is the only reliable way to know the levels in a specific property.

  • Property transactions: Buyers and lenders may request radon testing during due diligence.
  • Occupied buildings: Offices, multifamily, schools and daycares where people spend extended time.
  • Owner peace of mind: Understand indoor conditions for tenants and employees.
  • Baseline documentation: Establish results for future comparison after renovations or mitigation.

Properties Commonly Tested

  • Office buildings and professional complexes
  • Multifamily and mixed-use properties
  • Schools, daycares and institutional facilities
  • Medical and healthcare offices
  • Retail and hospitality properties with ground-contact occupied spaces

How Commercial Radon Testing Works

Step 1 — Test Planning

We review the building’s size, layout and ground-contact spaces to determine the number and placement of testing devices.

Step 2 — Device Placement

Testing devices are placed in appropriate occupied areas under closed-building conditions as required by the testing protocol.

Step 3 — Testing Period

Devices remain in place for the required testing period — typically a minimum of 48 hours for short-term testing.

Step 4 — Results & Report

Results are reported for each test location and compared to EPA guidance, so you can decide whether further testing or mitigation should be considered.

Understanding Your Results

The EPA recommends considering radon mitigation when levels are 4.0 picocuries per liter (pCi/L) or higher, and suggests considering action for levels between 2 and 4 pCi/L. Results above the action level are typically followed by additional testing or mitigation by a qualified radon professional.

This service is available as a stand-alone evaluation or as an optional add-on to Property Condition Assessments, Commercial Property Inspections and Facility Condition Assessments, subject to the agreed scope of work.

Important Limitations

Radon testing measures conditions during the testing period only, and results can be affected by weather, ventilation, building operation and occupant activity. Testing does not include mitigation system design or installation. Testing is performed in accordance with applicable protocols and state requirements.

Frequently Asked Questions

What is radon?

Radon is a naturally occurring, colorless and odorless radioactive gas produced by the breakdown of uranium in soil and rock. It can enter buildings through foundations, slabs and other openings.

Why test a commercial building for radon?

The only way to know a building's radon level is to test it. Testing is commonly requested during commercial transactions and for occupied buildings such as offices, schools, daycares and multifamily properties.

What radon level is considered a concern?

The U.S. EPA recommends considering mitigation when radon levels are 4.0 picocuries per liter (pCi/L) or higher, and suggests considering action between 2 and 4 pCi/L.

How long does commercial radon testing take?

Short-term tests generally run a minimum of 48 hours. Test duration, number of devices and placement depend on the building's size, layout and the applicable protocol.

Do you perform radon mitigation?

No. Radon testing is an evaluation service. If elevated levels are found, mitigation should be performed by a qualified radon mitigation professional.

Know Your Building. Understand Its Condition. Protect Your Investment.

PCAs • FCAs • Commercial Building Inspections • Infrared Thermography • Serving GA, AL, NC & TN